Conveyor Production
- Production Runs – low & mid-volume production runs approximately 500,000 pieces or less.
- High-Speed Pick & Place Machines place up to 28,000 Surface Mount Devices per hour, per line.
- SMD size capabilities – as small as .0201
- Board Sizes – 1.97” x 2.75” (50mm x 70mm) and up to 20” x 20” (510mm x 508mm) at a thickness range of .008” x .24” (.2mm – 6mm).
Non-conveyor Production
- Production Runs – low & mid-volume production runs approximately 500,000 pieces or less.
- High-speed placement of complex components with tight tolerances accurately placing up to 3,600 Surface Mount Devices per hour per machine.
- SMD Size Capabilities – .0402 to 3” square,
- Feeder Station per machine – more than 100 for high-volume placement of surface mount devices per board in a single pass. These machines are also equipped with vacuum board supports for increased placement accuracy on boards under the standard .062 thickness.
Automated Through-Hole Assembly
Hand (Manual) Assembly
Soldering, Selective and Wave
Overseas Surface Mount Production Capabilities
- Production Runs – high-volume
- High-Speed Pick & Place Machines place up to 28,000 Surface Mount Devices per hour, per line.
- Capacity to place more than 100 million SMDs per month
- SMD size capabilities – as small as .01005
- Specialized SMDs – BGAs – Flip-Chip –
- Board Sizes – 1.97” x 2.75” (50mm x 70mm) and up to 20” x 20” (510mm x 508mm) at a thickness range of .008” x .24” (.2mm – 6mm).
LED Assembly
- Production Runs – low & mid-volume production runs approximately 500,000 pieces or less.
- High-Speed Pick & Place Machines place up to 28,000 Surface Mount Devices per hour, per line.
- SMD size capabilities – as small as .01005
- Board Sizes – 1.97” x 2.75” (50mm x 70mm) and up to 48” x 20” (1.22m x 508mm) at a thickness range of .008” x .24” (.2mm – 6mm).
